Nagyobb kép
|
Rendszámcserélő / rendszámforgató távirányítóval autóra (EU) - légy olyan, mint James Bond
[CARPLATEFLIPPER-EU] |
|
| Item #: 246 |
|
Ha már unja
- a rendőrség és a parkoló társaságok - nulla szolgáltatás ellenére történő - rendszeres pénzbehajtó és harácsoló akcióit/vegzálásait,
- esetleg zavarosban halászik, vagy tilosban jár,
- netalán élvezi a sebességet, mániákus adrenalinfüggő és gyorshajtó,
- vagy mert csak...
akkor Önnek ezt a diszkrét EU rendszámcserélő / rendszámforgató rendszámtartó keretet ajánljuk figyelmébe, amely egy gombnyomásra felcseréli a rendszámát a két különböző rendszámtáblája közül a másikra.
This European plastic remote controlled license plate flipper, shifter, rotator frame for have lots of very useful functions:
- Designed to fit ideally for European Union license plates (UK, Germany, Ireland, Scotland)
- You can flip your license plates instantly, within 2 seconds
- You just need to push the button on your remote controller and license plate will flip (together or separately)
- They work even you while you drive
- You always know whether your license plates are flipped or not - product contains led controller, which indicates the status
- License plate flipper works despite bad weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic and aluminium
- Frames looks like typical car license frames, which makes them discreet
- They are very customized and could be used in almost all vehicles (car, truck or SUV).
Car frame shifter, rotator (flipper) for automatic change of car numbers. It is a device for the automatic number plates rotation. The device allow, provides for the installation of two license plates (one fake and one real). And with the remote you can use one plate, while after pressing the button use the other license plate. Plate flippers is a universal license plate flipping bracket that will fit all vehicles. You can change the number plate on one another for auto/motor shows, exhibitions, tunning studios, secret services, event organizations, car clubs and meetings on specialized sites or racetracks. Frame shifter with a change of license plate with registration to an individual or a souvenir - a good way to stand out. Perhaps you remember the movies about James Bond, or Luc Besson's Taxi-driver who used to have a similar device installed in their cars. Many of us were fascinated when it was switched. What once was a science fiction has become a reality now.
Control key is in your car in a convenient location for the driver (installation of the remote control). When a key is pressed (or the control) frame turned around 180 degrees, changing one number to another.
Metal frame construction covered with tamper-resistant shifter composition. Pull out the number of such scope is much harder than plastic avtoramok, while it is not subject to corrosion and temperature extremes. The device operates not only in the dry state, but also under water.
For installation with a nominal registration and license plates, which must be entered in the data sheet. You will not have to with a screwdriver in hand to change their registration numbers on the back and registered for one trip - one keystroke (control buttons). The installation procedure doesn't require cutting into the bumper or vehicle body.
Features
- If you have 2 plates - you don't have to change them with a screwdriver, only press the button and plates will be changed.
- Fast moves, just need 2 seconds.
- Anti-rust, stable quality, for long term use, reliable mechanism.
- Synchronized of (both) the front and rear frame.
- The license frame was made by high quality car board material, high intensity, never get rust, can completely afford the sunshine, rain, frost and any high-low temperature or worse environment. Can work even under water.
- It has regular form so that the installed device is totally unnoticeable, turning mechanism is hidden behind a removable panel.
- Can run at speeds up to 200 km/h (tested).
Installation
From left to right (normally the host installed within range of the dashboard):
- Power, to the accumulator
- LED, to the host directly, just put it in your sight
- B interface, 5 m wire to the Back frame
- A interface, 3 m wire to the Front frame.
How to control the frame?
There are 4 buttons on the host, 1 power button and 3 control buttons (A, B, A/B):
- Press power button, The LED indicator turns green, at the same time, indicators for the 3 control buttons turn red. Indicate that the systems in working state. When you press the control buttons, the flip frame will auto turn.
- A Button: Front frame controlling. Press ONE time, the front frame auto turn ONE time, Press A button once again, the front frame will turn back to its initial state.
- B button: Back frame controlling. Work the same as A.
- A/B button: Front and back frames controlling. Work the same as A, but this button can control the two frames on the same time.
Specifications
- Power supply
- Voltage: DC 12V
- Fixed electric current: 0.6 A
- Main material performance: aviation aluminum (black) / stainless steel (1 mm) and plastic
- Fixed power: 2 W
- Flip Speed: changing one number into another within 2 - 3 seconds (response time 0.9 - 1.2 seconds)
- Control distance: max 50 m
- Wire length: 3 (front) and 5 (back) m
- Weight: 3 kg
- Dimensions: 55 × 2.5 × 16 cm (mounted under the bumper and trunk lid: 145 × 112 × 32 mm, number plate size is 520 × 110 mm)
Package contents
|
|
 |
|
|
